Start freeSign in

AI product engineer · Text → CAD → Prototype

Back to blog
STEP·editing·tutorial

How to Edit a STEP File Online, Without the Original CAD

5 min read

The file you can't quite change

Someone sends you a STEP file. A supplier's part, a customer's housing, an old project from a colleague who left. It's almost right. You need one hole moved, one wall a bit thicker, the screws swapped for a different head.

Then you open it and remember why STEP files are annoying. There's no feature tree. No sketches, no history, no "edit extrude". Just a finished solid. So the small change turns into an afternoon of rebuilding geometry that already exists, or an email asking someone else to do it.

That's the problem we built Edit CAD files for.

What Ragnar does differently

In Ragnar you don't need the history. You upload the STEP file, say what you want, and Ragnar changes the solid itself. You get a new version with real B-Rep geometry, the same kind of exact surfaces your CAD program uses, so you can measure it, keep editing it and export it.

The whole loop looks like this:

  1. Upload the file. Drop your .step or .stp into a new design at app.ragnar.build.
  2. Point at what you mean. Type @ and pick the face, edge or part you want to change. No guessing which hole you meant.
  3. Say the change. "Add four M4 holes, 10 mm from each corner." "Make this wall 2 mm thicker." Plain words, with numbers when they matter.
  4. Check it and export. Turn the model, measure it, then export STEP for your own CAD, STL for printing, DXF for cutting or GLB for the web.

A real session, step by step

Our CEO Jonathan tried this last week on a tow coupling, a dense assembly with 26 parts he had as one STEP file. Here's what he typed and what each step cost.

First he asked Ragnar to bring the file in as it was. That took 0.43 credits.

Then he picked four screws with @ and wrote: "Change to allen screw cap instead." Ragnar swapped the cross-head screws for socket-head cap screws and left everything else alone. That cost 2.15 credits.

Later he made a fillet on the housing bigger, didn't love the size, and just wrote: "Go with 9mm instead." Four words. Ragnar set the fillet to 9 mm for 0.47 credits.

That's the part people tend to like most. You don't restart or re-explain. You talk to the part like you'd talk to a colleague sitting next to you.

You can see both of those edits, before and after, on the Edit CAD files page.

What edits actually cost

Here are Jonathan's edits on four uploaded STEP files from that week, at Balanced effort:

EditCredits
Rotate the model 90 degrees0.25
"Go with 11mm instead"0.37
"Go with 9mm instead"0.47
Fillet on one edge of a winch0.63
Widen the base of a steel tower2.11
Four screws to socket heads2.15

The simple ones, a fillet, a new dimension, a rotation, all came in under one credit. Across all 11 of his geometry edits that week, the median was 0.63. Bigger changes cost more: 2.11 for the tower base, 2.15 for the screws, and 6.12 when he made the fillets on three faces bigger at once.

For scale: the free plan gives you 15 credits a month, with no credit card, and exports don't use credits. Higher effort levels take more time and credits, so for quick fixes, Balanced is usually plenty.

Tips for clean edits

A few habits make edits faster and cheaper.

Give numbers. "Make it thicker" works, but "make it 2 mm thicker" gets you exactly what you want on the first try.

Point with @. If a part has twelve holes, tell Ragnar which one. Picking the face or edge removes the guesswork.

One change at a time. Small steps are easier to check, and if one isn't right, a short follow-up fixes it.

Follow up in plain words. "Go with 9mm instead" is a perfectly good prompt. Ragnar knows what you just did.

Measure before you export. Check the dimensions that matter to you. It's quick, and it saves a reprint.

What you keep, and what you don't

Ragnar edits the geometry, not the feature tree from the program the file came from. The STEP you export is a clean solid that opens in SolidWorks, Fusion, Inventor, CATIA, Creo, NX, Onshape and FreeCAD, but it won't carry the original program's history.

So if you rely on that history, keep your native file as the master and use Ragnar for the changes you'd otherwise rebuild by hand. If you only have the STEP, you've lost nothing, because there was no history to begin with.

Have a native file instead? If it doesn't come in cleanly, export it as STEP from the program it came from and upload that. STEP has the most complete support. If you're moving the result into your own CAD next, our guides for SolidWorks and Fusion 360 walk through the import.

One note on privacy

On the free plan, projects are public. On Pro and Business, they're private and stay private. If the file belongs to a customer or a supplier, use a paid plan.

Try it on a file you already have

Pick a STEP file that's been sitting on your desk because it needs one small change. Upload it at app.ragnar.build, point at the part, and say what you want. For a lot of fixes, that's the whole job.